MICRO Digital Pressure Gauge is full electronic structure and battery powered, which make it very easy for onsite installation. Specifically, a high precision piezo resistive pressure sensor is used and output signal is processed by high precession low temperature drifting amplifier and then sent to high precession Analog to Digital converter to be converted in to digital signal and after being computed and processes, the actual pressure value is showed on to LCD screen.
Series BPZ2006 is a TRUE media isolated, wet/wet digital differential pressure gauge designed to measure corrosive gases and liquids. Its rugged construction incorporates a micro machined silicon pressure sensors (MEMS) and has no moving parts ensuring long life. Pressure is transferred from diaphragm to sensor through silicon oil.
| Description | Model | |||
| MPC-05 | BPZ-2000 | TX-430 | BPZ-2006 | |
| Measurement | Pressure | Pressure | Pressure | Differential Pressure (ΔP) |
| Display | 5 Digit, 15 mm High 2 Line Backlit LCD with Bar Graph | 4 Digit, 18 mm LCD with Bar Graph Display | 5 Digit 7 Segment single line LCD display | 5 Digit, 18 mm High LCD with Bar Graph Display |
| Resolution | As per range and unit selection | |||
| Calibration | Password Protected | N. A. | Password Protected | N. A. |
| Accuracy | ±0.5% of FS or Better | ±0.25 of FS or Better | ±0.15 of FS | ±0.25 of FS or Better |
| Power Supply | 9V Alkaline Battery | 9V Alkaline Battery | 7.5 VDC (1.5 x 5 No Alkaline) | 9V Alkaline Battery |
| Battery Life | 2000 Hours in continues mode 2 years in sleeping mode | 2 Years in Power Saving Mode | 1000 hours in Continues Mode | 2 Years in Power Saving Mode |
| Bar Graph | Pressure on percentage of dynamic display (in progress bar display) | Pressure on Percentage of dynamic display (In progress bar display) | N. A. | Pressure on Percentage of dynamic display (In progress bar display) |
| Enclosure | S.S. 304 Snap Action Case with bayonet bezel Ø100 mm | ABS Ø67 mm x 116 mm Height | Aluminim Anodized Ø100 mm | ABS Ø67 mm x 116 mm Height |
| Sampling Rate | 4 Times / Sec. | |||
| Key Pad | Soft Touch Keypad on Front Window | |||
| Proof Pressure | 150% of FS | 200% of FS or 6000 PSI whichever is lower | 150% of FS | 200% of FS or 6000 PSI whichever is lower |
| Burst Pressure | N. A. | 300% of FS or 10000 PSI whichever is lower | N. A. | 300% of FS or 10000 PSI whichever is lower |
| Media Compatibility | All corrosive media compatible with SS 316 | |||
| Temperature | -20... 70 Deg C | -1... 49 Deg C | 0... 50 Deg C | -1... 49 Deg C |
| Process Connection | 1/4" BSP (M) | 1/4" NPT (M) | 1/4" BSP (M) | 1/4" - 1/8" NPT (M) |
| Engineering Units | Mpa, kPa, Pa, bar, psi, Tor, ATM, Kg/cm2, mmH2O, MH2O | psi, bar, Kg/cm2, kPa | Kg/cm2, bar, psi, kPa, mmHg, Inch Hg, mmH2C Inch H2O | psi, bar, Kg/cm2, Kpa |
| Pressure Ranges | -1 to 700 bar | 0-1000 bar | -1 to 700 bar | 0 to 35 bar |